■ History of version
Version 2.0 is upgraded on 2009/4/10
■ Contents (Ver.1.3 to Ver.2)
New functions
1) WAVE file reading is faster.
2) Time span can be set in start and end time by entering figures like “hh:mm;ss.”
3) Resume function works for file path.
4) Memory function about Calib. variable (Unit/Volt) is added.
5) The upper limit of time span using calibration reference is changed from
10 sec to 60 sec.
6) File close is added.
■ Download and Installation
1) Create a folder to save a downloaded file. For example. What about “RION
Soft” as the folder name?
2) Click [Download] button, and save the setup file
“DA-20Viewer_x.x_setup.exe” in the folder you prepared already. (x.x shows
the version number)
3) Make sure that all application software stop running on Windows.
4) Double clicking the setup file in the folder is to start installation.
Please follow the instructions accordingly.
5) When the installation is done, [finish] button appears. Clicking the
button is to finishes the all instruction procedure.
■ Operation procedure
Select ［Program］-［RION］-［DA-20Viewer］-［DA-20Viewer］ from the Start menu.
Then the software begins.
■Software License Agreement
This Software License Agreement (hereinafter this “Agreement”) stipulates terms and conditions of the grant of license to you (hereinafter “Customer”) to use Software.
The Customer may download and use the Software if the Customer agrees to all terms and conditions of this Agreement.
1. Copyright
Rion Co., Ltd. (hereinafter “Company”) owns the copyright to the Software. The Customer shall not have any right with regard to the Software other than the license granted herein by download of the Software.
2. Grant of License
The Company shall grant to the Customer nonexclusive and royalty free license to use the Software subject to the following terms and conditions:
(1) The Customer’s use of the Software shall be limited to a computer with the Software downloaded.
(2) The Customer may download the Software only for use by the Customer.
(3) The Customer may use the Software only on the computer onto which the Software is downloaded and installed for the Customer’s use only.
(4) The Customer shall not reverse engineer, reverse compile, or reverse assemble the Software.
(5) The Customer shall not copy, alter, reproduce, convert, or otherwise amend, or lend or assign to a third party.
(6) The Software may be upgraded to an improved version by the Company at some future time. This Agreement shall be applicable to the improved version of the Software unless a separate software license agreement is made.
3. Termination of License
This Agreement and License of the Software granted herein shall terminate without notice from the Company if The Customer breaches any provision of this Agreement. The Customer shall stop using the Software and destroy all original and copies of the Software immediately after such termination of this Agreement.
4. Warranty
The Company does not warrant that the Software will perform, meet The Customer’s requirements, is error-free or any other warranty.
The Company shall not be liable for any damage suffered by the Customer directly or indirectly caused by the Customer’s use of the Software or failure to use the Software for any reason.
5. Hazardous Uses
The Product is not intended for use, and you may not use or allow others to use the Product, in connection with any application requiring fail-safe performance such as the operation of nuclear power facilities, air traffic control or navigation systems, weapons control systems, life support systems, or any other system whose failure could lead to injury, death, environmental damage or mass destruction. You agree that the Company will have no liability of any nature, and you are solely responsible, for any expense, loss, injury or damage incurred as a result of such use of the Product.
6. Waiver
The failure by either the Customer or the Company at any time to enforce its rights under this Agreement will not be construed as a waiver of such rights, nor will it in any way affect the validity of this Agreement.
7. Entire Agreement
This Agreement constitutes the entire and exclusive agreement between the Customer and the Company and supersedes all existing written or oral agreements, representations or communications between the Customer and the Company relating to the Software.
8. Governing Law and Jurisdiction
This Agreement shall be governed and construed in accordance with the laws of Japan.
Tokyo District Court of Japan shall have exclusive jurisdiction with respect to all disputes arising from this Agreement between the Customer and the Company.
|
