| Printer KP-06 |
| Measurement condition, particle count by particle size, control of particle
counter |
 |
- Remote control of particle counter
- The measurement values are recorded by the numerical values or bar graph.
Average, maximum and minimum values are recorded.
- Measurement conditions are also recorded.
- Particle count change over time is recorded by bar graph.
- Control of particle counter, unattended measurement possible
Printer for KC-01D1、03A1、18、20、22A、KL-20A、22、26、27 |
| Specifications |
| Particle size ranges |
Max 6 channels (depending on the connected particle counter) |
| Measurement result printout items |
Date/time
Count for each size range (total only, or single and total, max. 7 digits for each) |
| Functions |
Selective printout of size ranges, Repeated measurement, Blank measurement, Automatic light source pause |
| Usable paper type |
TP-08 Thermal printer paper (58 mm X 30 m)
TP-10 Lint-free thermal printer paper (58 mm X 30 m) |
| Dimensions and Weight |
approx. 71 (H) X 170 (W) X 242 (D) mm, approx. 1.2 kg |
|
|
| Printer ＤＰＵ−４１４ |
| Printout of numeric data and graphic data |
 |
Printer for the counter with RS-232C
- Printing width 40 characters in normal mode, 80 characters in condensed
mode
- Auto-loading feature makes printer paper replacement a snap
- Dual power supply principle allows operation with AC adapter or rechargeable
battery
- Environment-friendly nickel metal hydrid (Ni-MH) battery
*This product is manufactured by Seiko Instruments Inc. |
| Specifications |
| Printing method |
Thermal serial dot |
| Character matrix |
9 dot high X 7 dot wide |
| Printing speed |
Max. 52.5cps (normal), Max. 80 cｐｓ (condensed) |
| Interface |
RS-223C |
| Power supply |
AC adapter: Input AC100V to 250V 50/60Hz、Output DC6.5V 2.2A
Battery Pack (built-in the main unit): Nickel metal hydrid battery (Ni-MH),
4.6 V
Single battery charge suffices for printing approx. 3000 lines |
| Dimensions/Weight |
160 X 170 X 66.5mm, Approx. 580g (excluding battery) |
| Printer paper |
TP-14, TP-26 (clean paper) |
|
|
| Sensor Controller KZ-70 |
| On-site monitor for multi-point monitoring system |
|
- Particle counter controller
- Monitor on the spot
- Three controller modes: Manual, Auto and Repeat
- Particle size distribution: Max. 6 channels
- Max. 300 m (extension) of sub-line cable available in controller mode
- Max. 1000 m (extension) of bus-line cable available in monitor mode
|
| Specifications |
| Available sensors |
KS-93, KS-16, KS-16F, KS-17, KS-17A, KA-80A, KA-81 |
| Modes |
Monitor mode
Controller mode (Manual, Auto, Repeat) |
| Display items |
Date/Time,
Information of sensor (Node address, Model, Flow rate, updated condition
of sensor), Measurement data (Sample volume, Error info, Particle size,
Count),
Last measurement data (Count, Volume, Error info) |
| Particle size distribution |
Max. 6 channels |
| Dimensions and weight |
170 (W) X 201 (D) X 60 (H) mm
Approx. 1.3 kg (main unit) |
|
|
| Aerosol Dilution Unit KD-05 |
| Measurement for highly concentrated sample air, 10-fold dilution factor |
 |
Available counters: C-01D1, KC-03A1(KC-05)
- When using the sample air whose particle concentration exceeds the max.
level of the counter, the unit dilutes the sample air by the known dilution
factor and supply the air to the counter.
- Prevention of counting loss
- Direct connection to the sensor
|
| Specifications |
| Particle size available for dilution |
2 micron or less |
| Air flow rate |
50mL/m、300mL/m |
| Dilution factor |
10-fold |
| Interface |
RS-223C |
| Dimensions and weight |
Approx. 80 X 110 X 100 mm, Approx. 900 g |
|
|
| Pulse Height Analyzer KH-03 |
| Monitoring size distribution and its change |
The Pulse Height Analyzer KH-03 accepts an analog input signal from a particle counter and analyzes pulses comprised in this signal in real time. Signals are ranked by pulse height. The unit has a PHA mode for creating a pulse height based histogram, and an MCS mode for observing time-based fluctuations of pulse count.
|
|
System configuration
- A supplied probe for connection of the analog signal from the particle
counter
- The main unit which performs analysis of the signal from the probe
- The Pulse Height Analyzer control software which controls the hardware and serves for data management
- An adapter for connection between the main unit and the computer
- A generic computer on which the control software is installed. (The computer
is not supplied.)
Features
- Monitoring the accuracy of Particle counter's particle size range (particle
size resolution) and distribution performance
- Confirming of the back ground level
- Calculation of the more detail size distribution
- Monitoring of particle count change over the long time measurement
|
| Specifications |
| Input pulse detection frequency response |
1kHz to 500kHz |
| Analysis voltage range |
0〜64mV、128mV、256mV、512mV、1024mV、2048mV、4096mV、8192mV、16384mV、 |
| Sample time |
2, 10, 20, 50, 100, 250, 500, 1000 micro sec; selectable
Tolerance within +/-5% |
| Analysis modes |
PHA mode (pulse height analysis)
MCS mode (multi channel scaling) |
| Pulse count memory size |
256ch |
| Absolute maximum input voltage range of Probe |
+/- 18V |
| Input impedance of Probe |
1M ohm |
| Input capacitance |
35 pF |
| Software |
Windows95, Windows98 (Using commercially available PC) |
| Dimensions and Weight |
Approx. 30 X 3.5 X 24 cm, Approx. 1.9 kg |
|
|
| Air Supply Unit KG-02 |
| Ensuring the reliability of Airborne particle counter |
 |
- Dust controlled motor in pump enables to use in clean room
- Aerosol and pump can be extended to 5 m
|
| Specifications |
| Supplied particle |
0.1 to 2 micron, poly, polystyrene latex spheres |
| Nebulizer capacity |
20 mL |
| Power supply |
AC100 V±10％、50/60 Hz 40 VA |
| Dimensions and weight |
Approx. 48 X 25 X 23 ｃｍ, Approx. 8 kg |
|
|
| External Display KX-13/16 |
| Display for Cleanliness |
 |
- Displays ten times particle counts over 0.5 micron
- When measuring 0.01CF air, displays clean room class
- Extending the cables to 100 m
- Can be connected to particle counter, TTL, pulse analyzer
|
| Specifications |
| Display |
10 times values of particle count over 0.5 micron |
| Display digit |
6 digit |
| Dimensions |
23 X 62 X 16 cm |
[Previouse] [Next] [Index] [Home]
Copyright(C)2001 RION Co.,Ltd.
|