• Remote control of particle counter
• The measurement values are recorded by the numerical values or bar graph. Average, maximum and minimum values are recorded.
• Measurement conditions are also recorded.
• Particle count change over time is recorded by bar graph.
• Control of particle counter, unattended measurement possible

• Particle counter controller
• Monitor on the spot
• Three controller modes: Manual, Auto and Repeat
• Particle size distribution: Max. 6 channels
• Max. 300 m (extension) of sub-line cable available in controller mode
• Max. 1000 m (extension) of bus-line cable available in monitor mode

• A supplied probe for connection of the analog signal from the particle counter
• The main unit which performs analysis of the signal from the probe
• The Pulse Height Analyzer control software which controls the hardware and serves for data management
• An adapter for connection between the main unit and the computer
• A generic computer on which the control software is installed. (The computer is not supplied.)

• Monitoring the accuracy of Particle counter's particle size range (particle size resolution) and distribution performance
• Confirming of the back ground level
• Calculation of the more detail size distribution
• Monitoring of particle count change over the long time measurement
  

• Choice of three operation modes: purge mode, measurement mode, and combination mode for preset sequence of purge and measurement operations.
• Memory for up to 50 sets of parameter settings for purge mode or measurement mode.
• Selectable blank volume lets sample fluid flow rate stabilize after start of plunger action.
• Syringe set with integrated valve for easy replacement.
• Automatic syringe capacity detection.
• When the KZ-30W1/KZ-30W2 is used together with the Rion liquid-borne particle counter KL-11 etc., changing a setting that is common to both units (sample flow rate, blank volume, number of measurement cycles in the measurement mode) at one unit will automatically cause a change at the other unit as well, so that the setup of both units is matched.
• The syringe sampler KZ-30W2 is in conformity with the European Union's CE Compliance requirements.

• The simple chemical-proof sampler, KZ-30U is designed to pressurize and supply sample fluid to the particle counters for off-line measurement.
• Easy-to-operate chemical resistance sampler with chamber
• When the pressure in the chamber is too high, exhaust the air in the chamber to prevent the malfunction.

Specifications

Maximum allowable input air pressure	Sample air inlet: 0.4 MPa (gauge pressure) Chamber: 0.2 MPa (gauge pressure)
Adjustable pressure range:	0.02 to 0.2 MPa (gauge pressure)
Maximum allowable valve pressure:	0.3 MPa (gauge pressure)
Material of parts in contact with sample fluid:	PFA, PTFE, CTFE
Material of chamber:	Pyrex glass (Inner surface is Teflon coated.), SUS316, PP, Chloroprene rubber
Dimensions and weight	674 (H) X 250 (W) X 400 (D) mm, Approx. 15 kg

• For the measurement of particles with large size and high specific gravity which does not come in the sensor by usual forcing up method. Because their sedimentation velocity is too much high.
• The sample fluid comes in through the funnel on the sensor. Measurement is carried out while the particles are falling.

Specifications

Sampling	Dropping method
External pump	KZ-28M1

Sample flow rate	8 to 15 mL/min
Connection	PT1/4
Materials of parts exposed to sample fluid	PTFE, PCTFE, High-purity Ceramic (SiC)
Allowable sample fluid temperature	10 to 70 C
Allowable sample fluid pressure	0.1 to 0.4 MPa, Max: 0.5 MPa

Specifications

Dimensions	40(W) X 29(H) X 15 (D)cm
Power supply	AC100V+/-10% 50/60 Hｚ. 0.5 A

• Monodispersed PSL suspension by 1000 particles/mL
• Accuracy of particle size and its distribution;
  accuracy of size: Indicated value +/- 3%
• On-site checking of the liquid-borne particle counter

Models	Particle size (micron m)	Nominal diameter (micron m)
CTX-0023	0.231	0.23
CTX-0034	0.344	0.34
CTX-0060	0.600	0.6
CTX-0099	0.990	0.99
CTX-0211	2.106	2
CTX-0515	5.153	5
CTX-1040	10.35	10
CTX-1560	15.62	15